Wireless Access Point Installation Tips

|

Wireless Access Point Installation Tips

Wireless access points come in a variety of styles and must be installed correctly to ensure optimal performance. Some access points are wall or ceiling mounted, while others can be placed on a desk or surface. Some are sectorized, broadcasting signals within a range of thirty to forty-five degrees. To maximize their effectiveness, the points should be located in an open space, and be positioned away from any objects or technologies that might block their range.

Before you begin, you must first install the mounting plate on the surface of the wireless access point. If you are using a wireless router, a special crimping tool is required. Once the mounting plate is securely attached, feed the cable into the wireless access point’s network socket and label it according to the instructions. You can now feed the wireless access point with the internet connection that you have set up in your router. To ensure that you have installed your wireless access point correctly, check out the following tips for installation.

Before installing wireless APs, conduct a Wi-Fi survey of the area where they will be placed. During the installation process, check the coverage of your network to make sure the AP is installed properly. You can check this by using a mobile device or by looking at native wireless signal readings. A thorough Wi-Fi site survey will help you determine if the new APs will improve your network connectivity. If you are installing multiple APs, take a photo of each location to ensure the correct location. This documentation will not only prevent you from forgetting to label your wireless APs, but will also help others locate them if you happen to be away.

Good WiFi isn’t that hard to achieve. You just need to know what parameters are good and work within them. Whether you’re installing a wireless access point in a home, warehouse, or open space, good WiFi is always possible. Following these tips will provide you with a usable WiFi network with adequate bandwidth throughput. And once you’ve set up your wireless access point correctly, you can enjoy uninterrupted Internet use for years.

While installing a WiFi network, take into account the number of devices that will be using the internet. Think about what type of activities will be conducted on these devices. If you have a large campus, for example, overlapping access points may occur. Avoid these situations by keeping your access points at least three to five feet away from other sources of radio. You should also install wireless access points in condensed areas such as office buildings and student dormitories.

The initial configuration of a wireless AP requires a PC or laptop to be connected to a central wireless controller using a nine-pin RS-232 cable. Make sure the AP is powered on before mounting it somewhere out of reach of children or inaccessible places. If you are unsure of how to do this, you can look up the default password online and change it. Then, use your web interface to access each AP and check the settings.