Wireless Access Point Installation Tips
When you buy wireless access points, you’re most likely going to find several different models that require installation. You can learn how to install these devices by following the instructions that come with them, but sometimes you may encounter difficulties. If that’s the case, don’t fret. These tips will make the process as painless as possible. The first step in wireless AP installation is to properly label each AP. Label each AP with its label, and take a picture to document its location.
Once you have your wireless access point installed, you must ensure that it is secure and protected. You can do this by blocking the web GUI so that unauthorized people can’t access it. In addition, you should ensure that the device’s performance and security are not compromised. It’s also a good idea to keep the AP out of sight and out of reach of kids and pets. Besides, you can use false ceiling tiles to hide it. Lockable network cabinets and racks are also available.
Before you begin installing the AP, conduct a Wi-Fi site survey. This will help you determine which areas will receive the greatest signal. After installing the wireless access point, test the coverage area. It’s as simple as walking around with a wireless device and checking the signal strength on the native wireless receiver. You should then install the wireless access point according to the instructions on the packaging. It’s also important to consider the number of devices that will use the network and what types of online activities they will be doing.
Next, you should label the wireless access point and assign it a static IP address. This will make it easier to remember which settings are which ones aren’t. You can also back up your existing settings to avoid losing them. Regardless of what type of wireless access point you’re using, make sure you back up the configuration settings before changing them. When in doubt, check the manufacturer’s manual or documentation. You can also login to individual APs with their web GUIs.
Another thing to consider is the placement of the wireless access point. Some types are meant to be wall-mounted while others are intended for top-of-desk installation. Make sure that the antenna of the Wireless Access Point faces the area it’s intended to serve. Be sure to mount the wireless access point at least three to five feet away from other radio sources. If the area of coverage is obstructed by a building or a room with a lot of furniture, the signal from your wireless access point will be weaker.
If your wireless network is not as strong as it should be, consider moving the access point to a different location. This way, your wireless signal can cover a bigger area. Once the wireless signal is stronger, you can move the access point around and make it cover the entire house. By following these tips, you’ll have a strong WiFi signal that will last for years to come. With a little bit of research and planning, you’ll be well on your way to having a high-quality wireless network.
