Let Huawei Champion Your Ideas

Wireless Access Point Installation Tips

wireless access point installation tips|wireless access point installation tips

Wireless Access Point Installation Tips

Wireless access point installation can be tricky if you don’t follow these tips. There are many aspects to consider when installing your wireless AP. By following these tips, you’ll be on your way to enjoying uninterrupted WiFi. In addition, these tips will also help you choose the most suitable location for your access point. Whether it’s ceiling or wall mounted, the wireless AP’s location is crucial for good wireless performance.

Before installing wireless APs, conduct a Wi-Fi site survey. To make sure the AP is located in the best spot, use a mobile device and check its native wireless signal. After that, you can turn the AP on to test Wi-Fi coverage. To test coverage in various areas, simply walk around with the device and check the signal strength. If you’re not sure whether the signal is strong, you can use a Wi-Fi tester or a Wi-Fi signal analyzer to determine the situation.

Another important step in wireless AP installation is to make sure the wireless network’s cabling is out of reach. The AP must be placed in an inconspicuous spot where people won’t accidentally touch it. Alternatively, you can use false ceiling tiles to hide it. If you can’t avoid the need to hide the network components, you can install locks on network cabinets or racks. If all else fails, you can always move the AP to another location.

Another essential step in wireless access point installation is to change the default admin password of the wireless AP. It’s a good idea to look up the default password on the internet and change it if necessary. Then, double-check your password by logging into the web GUI of the AP. In case you’re using a central wireless controller, the individual APs may have their own web GUIs. This way, you can make sure that no one tries to hack the network.

If you are a newcomer to wireless access point installation, make sure you have a few tips in mind. First, you must choose a name for your wireless access point. The name is what wireless devices will recognize your access point as. Also, you should set a pass phrase to protect your access point. Make sure the pass phrase is unique, too. You should also choose an encryption method, like TKIP or AES.

After selecting an IP address, make sure you set the MAC address of the device. The MAC address of the device must match the LAN MAC address labeled on the bottom of the access point. To do this, first find the IP address of the wireless access point and use the setup wizard to configure the basic settings. Then, you can go to the configuration program to configure the device. If your network device supports dual-band, you should select it and run the setup wizard to configure the wireless access point.

In addition to setting the WiFi parameters, you should also consider the performance of the network. A good WiFi signal is not difficult to obtain if you know what to do. If you follow these tips, you’ll usually end up with a usable WiFi network. Make sure to choose an installation location that allows for high signal strength, otherwise the signal may be scattered throughout the building. This will ensure that everyone who needs to access the network has a strong signal.

You May Also Like

Leave a Reply

Your email address will not be published. Required fields are marked *