Wireless Access Point Installation Tips
|
Wireless Access Point Installation Tips
Before you begin installing wireless access points, there are a few basic tips that you should follow. First of all, label the APs clearly. If you have multiple APs, mark them on the floor plan map with their location, or take a picture of the APs and their labels. This documentation will help you avoid misplacing them and help you locate them later. You can also call the vendor to get additional instructions.
Consider the speed of your internet connection. Slow internet connection will negatively affect the performance of your wireless network, and you may experience buffering in online videos. If your internet connection is fast enough, you can try moving the wireless access point around to improve the signal strength. This way, the WiFi network will cover all areas of your house. This tip is essential if you have more than one access point. Depending on how many users are connected to your network, you may need to install several access points.
Label the wireless access points. The label can be printed on the bottom or attached to the unit. Labeling the device makes it easier to remember the configuration. It is a good idea to backup any configuration settings, too, in case the need arises. To do this, refer to the user manual or manufacturer documentation. Most of these devices have a label on the bottom to let you identify them. Make sure to label your wireless access point clearly.
When installing wireless access points, consider their location. Some access points are ceiling-mounted, while others are designed to sit on a desk or wall. The placement should be such that it will not interfere with the wireless signal. Also, be sure not to install several access points too close to each other. You should also place them away from any objects that may block their range. This will ensure maximum speed and range. If you have a small office, you can put your wireless access point in a central area.
When setting up your wireless access point, keep in mind that power may be a problem, especially if it’s located near the ceiling. If possible, power your wireless access point using Power Over Ethernet, which gives it the power it needs to function properly. You should also place your modem and wired router in a location where there will be minimal interference. This way, you can make sure that your wireless access point is safe and reliable.
Another important tip for wireless AP installation is to take a site survey. Before deciding where to install the wireless access points, you should take a walk around the building to assess how much coverage the network already has. This will give you an idea of whether your network will cover the entire space. If not, you should invest in a WiFi-enabled device and try to install as many APs as you can.
