Wireless Access Point Installation Tips

|

Wireless Access Point Installation Tips

There are a few wireless access point installation tips that you should follow for best results. Generally, you should install them according to the manufacturer’s instructions. Some models are best mounted on the wall or desk, while others should be installed below the ceiling. It’s also important to note that some models have a 30 to 45-degree broadcast range, so make sure to keep this in mind when placing them. You should also avoid placing multiple wireless access points close to each other as this will make the coverage inconsistent.

The first step is to label your APs. Write down the names and numbers of each one, and mark each location on a floor plan. If possible, take a photograph of the locations as well. This will help you avoid forgetting where you installed an AP, and will allow others to find them if you’re away. Once you’ve finished, you should call your vendor’s customer support to discuss any questions or problems.

Installing more than one wireless access point will increase the bandwidth, but it will also cause coverage overlap. Installing multiple access points in the same area will result in high costs and coverage overlap. If you have a large office, you may need to install more than one access point. Then, you can install additional AP’s in different areas of the house. But make sure you follow these tips carefully. The results will usually be usable WiFi for your users.

After you have selected a wireless access point, you should install a mounting plate where it will be installed. It provides a sturdy base for the access point, and you should place it in an area that minimizes interference levels. If you have a wired network, you should also install it in a spot where it won’t interfere with other wireless devices. It will be easier for you to troubleshoot problems if you have a list of requirements.

Changing the admin password is an essential step during wireless access point installation. You can find a password generator online. To make sure you have changed the password on your wireless access points, log into their web GUIs after you have powered them on. You may also want to connect all APs to back up batteries. If power fails for any reason, wireless users will be disconnected from the network. Fortunately, these steps should prevent problems and increase your network performance.

After you’ve paired your access point with other wireless devices, you can configure it. It’s important to remember that default passwords are easy to guess, and this may cause security problems. So, set a strong password for the administrator and label the access point to make it easy for you to remember. The SSID or Network Identifier (SSID) is what people will see on their Wi-Fi devices, so make it as recognizable as possible.